APPENDIX A
• Audio Alerting System: The G1000 System issues audio alert tones when specific system conditions are met.
See the Alert Level Definitions Section for more information. The annunciation tone may be tested from the
AUX - System Status Page.
Testing the system annunciation tone:
1) Use the FMS Knob to select the AUX - System Status Page.
2) Select the ANN TEST Softkey.
Or :
a) Press the MENU Key.
b) Highlight 'Enable Annunciator Test Mode' and press the ENT Key.
A-2
Figure A-2 System Status Page, Annunciation Tone Testing
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
Press to Test
Annunciation Tone
190-00663-00 Rev. A