Garmin G1000:Beechcraft Baron 58/G58 User Manual page 66

FLIGHT INSTRUMENTS
Changing Vspeeds and turning Vspeed flags on/off:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a
default value, an asterisk appears next to the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Vspeed flags can be turned on or off and values restored all at once or by category (takeoff and landing).
Modifying Vspeeds (on, off, restore defaults):
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight the desired selection.
4) Press the ENT Key.
5) To remove the window, press the CLR Key or the TMR/REF Softkey.
2-6
Figure 2-7 Takeoff and Landing Vspeeds
(Timer/References Window)
Figure 2-8 Page Menu
(Timer/References Window)
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT 190-00663-00 Rev. A