Changing navigation sources:
1) Select the CDI Softkey to change from GPS to VOR1 or LOC1. This places the light blue tuning box over the
NAV1 standby frequency in the upper left corner of the PFD.
2) Select the CDI Softkey again to change from VOR1 or LOC1 to VOR2 or LOC2. This places the light blue tuning
box over the NAV2 standby frequency.
3) Select the CDI Softkey a third time to return to GPS.
GPS
Selected
CDI Softkey Cycles Through
Navigation Sources
190-00663-00 Rev. A
NAV1 Selected
for Tuning
LOC1
Selected
Figure 2-28 Selecting a Navigation Source
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
FLIGHT INSTRUMENTS
NAV2 Selected
for Tuning
VOR2
Selected
2-19