Garmin G1000:Beechcraft Baron 58/G58 User Manual page 500

APPENDIX A
GMA 1347D MESSAGE ADVISORIES
Message
GMA1 FAIL – GMA1 is inoperative.
GMA2 FAIL – GMA2 is inoperative.
GMA XTALK – GMA crosstalk error
has occurred.
GMA1 CONFIG – GMA1 configuration
error. Config service req'd.
GMA2 CONFIG – GMA2 configuration
error. Config service req'd.
MANIFEST – GMA1 software
mismatch. Communication halted.
MANIFEST – GMA2 software
mismatch. Communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
GMA2 SERVICE – GMA2 needs
service. Return unit for repair.
GIA 63W MESSAGE ADVISORIES
Message
GIA1 CONFIG – GIA1 config error.
Config service req'd.
GIA2 CONFIG – GIA2 config error.
Config service req'd.
GIA1 CONFIG – GIA1 audio config
error. Config service req'd.
GIA2 CONFIG – GIA2 audio config
error. Config service req'd.
GIA1 COOLING – GIA1 temperature
too low.
GIA2 COOLING – GIA2 temperature
too low.
GIA1 COOLING – GIA1 over
temperature.
GIA2 COOLING – GIA2 over
temperature.
GIA1 SERVICE – GIA1 needs service.
Return the unit for repair.
GIA2 SERVICE – GIA2 needs service.
Return the unit for repair.
A-12
Comments
The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
An error has occurred in transferring data between the two GMAs. The G1000 system
should be serviced.
The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
The audio panel has incorrect software installed. The G1000 system should be serviced.
The audio panel self-test has detected a problem in the unit. Certain audio functions may
still be available, and the audio panel may still be usable. The G1000 system should be
serviced when possible.
Comments
The GIA1 and/or GIA2 configuration settings do not match backup configuration
memory. The G1000 system should be serviced.
The GIA1 and/or GIA2 have an error in the audio configuration. The G1000 system
should be serviced.
The GIA1 and/or GIA2 temperature is too low to operate correctly. Allow units to
warm up to operating temperature.
The GIA1 and/or GIA2 temperature is too high. If problem persists, the G1000 system
should be serviced.
The GIA1 and/or GIA2 self-test has detected a problem in the unit. The G1000 system
should be serviced.
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT 190-00663-00 Rev. A