Garmin G1000:Beechcraft Baron 58/G58 User Manual page 258

FLIGHT MANAGEMENT
Entering the individual passenger weight:
1) Press the FMS Knob to activate the cursor and highlight the passenger weight field.
2) Turn the small FMS Knob to enter the average passenger weight.
3) Press the ENT Key to confirm the entry.
The total weight of passengers is calculated by multiplying the number of passengers by the average passenger
weight.
Entering the cargo weight:
1) Press the FMS Knob to activate the cursor and highlight the 'CARGO' field.
2) Turn the small FMS Knob to enter the cargo weight.
3) Press the ENT Key to confirm the entry.
The 'ZERO FUEL WEIGHT' is calculated by adding the basic empty, pilot and stores, passenger, and cargo
weights.
Entering a fuel on board weight:
1) Press the FMS Knob to activate the cursor and highlight the 'FUEL ON BOARD' field.
2) Turn the small FMS Knob to enter the fuel on board.
3) Press the ENT Key to confirm the entry.
When the aircraft is in the air and a destination waypoint has been entered, the fuel calculations can be
completed.
• Estimated landing weight = zero fuel weight + estimated landing fuel weight.
• Estimated landing fuel weight = fuel on board weight - (fuel flow x ETE)
• Excess fuel weight = estimated landing fuel weight - fuel reserves weight
If the aircraft is on the ground or a destination waypoint has not been entered, the following fields display
invalid values consisting of six dashes:
• Estimated landing weight
• Estimated landing fuel weight
• Excess fuel weight
5-112 Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT 190-00663-00 Rev. A