Garmin G1000:Beechcraft Baron 58/G58 User Manual page 217

ARRIVAL (STAR)
A Standard Terminal Arrival (STAR) is loaded at the destination airport in the flight plan. Only one arrival
can be loaded at a time in a flight plan. The route is defined by selection of an arrival, the transition waypoints,
and a runway.
Selected Arrival
Preview of
Selected Arrival
Loading an arrival procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Select the EDIT Softkey; or press the MENU Key, select 'EDIT FLIGHT PLAN', and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Select the LD STAR Softkey; or press the MENU Key, select "Load Arrival", and press the ENT Key. The Arrival
Loading Page is displayed.
4) Select an arrival. Press the ENT Key.
5) Select a transition for the selected arrival. Press the ENT Key.
6) Select a runway served by the selected arrival, if required. Press the ENT Key.
7) Press the ENT Key to load the selected arrival procedure.
190-00663-00 Rev. A
Figure 5-66 Arrival Loading Page - Selecting the Arrival
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
FLIGHT MANAGEMENT
Destination Airport
Arrivals Available at KCOS
Selected Runway
Arrival Waypoint Sequence
5-71