Garmin G1000:Beechcraft Baron 58/G58 User Manual page 239

Large
Altitude calculated by the system
Text estimating the altitude of the aircraft as
it passes over the navigation point. This
altitude is provided as a reference and is
not designated to be used in determining
vertical speed and deviation guidance.
Small
Altitude is not designated to be used in
determining vertical speed and deviation
Text
guidance. Altitude has been retrieved
from the navigation database and is
provided as a reference.
Altitudes associated with arrival and approach procedures are "auto-designated". This means the system
automatically uses the altitudes loaded with the arrival or approach for giving vertical speed and deviation
guidance. Note that these altitudes are displayed as blue text up to, but not including the FAF. The FAF is
always a "reference only" altitude and cannot be designated, unless the selected approach does not provide
vertical guidance. In this case, the FAF altitude can be designated.
Altitudes that have been designated for use in vertical guidance can be "un-designated" using the CLR Key.
The altitude is now displayed only as a reference. It is not used to give vertical guidance. Other displayed
altitudes may change due to re-calculations or be rendered invalid as a result of manually changing an altitude
to a non-designated altitude.
Designating a waypoint altitude to be used for vertical guidance:
1) Press the FPL Key to display the Active Flight Plan Page on the MFD.
2) Press the FMS Knob, and turn to highlight the desired waypoint altitude.
3) Turn the small FMS Knob to enter editing mode.
4) Press the ENT Key. The altitude is now shown in blue, indicating it is usable for vertical guidance.
Designating a procedure waypoint altitude to be used for vertical guidance:
1) Press the FPL Key to display the Active Flight Plan Page on the MFD.
2) Press the FMS Knob, and turn to highlight the desired waypoint altitude.
3) Press the ENT Key. The altitude is now shown in blue, indicating it is usable for vertical guidance.
Altitude constraints are displayed and entered in feet mean sea level (MSL) values to the nearest hundred. An
altitude constraint in feet above ground level (AGL) format is supported for airports. When a database altitude
restriction is displayed, the G1000 allows entry of a different altitude when creating a waypoint, effectively
overriding the database restriction (only before the FAF). When a database altitude restriction of type "AT or
ABOVE" or "AT or BELOW" is activated, the system uses the "AT" portion of the restriction to define the vertical
profile.
190-00663-00 Rev. A
White Text
Altitude has been entered manually.
Altitude is designated for use in giving
vertical speed and deviation guidance.
Altitude does not match the published
altitude in navigation database or no
published altitude exists.
Altitude is designated for use in giving
vertical speed and deviation guidance.
Altitude has been retrieved from the
navigation database or has been entered
manually and matches a published
altitude in the navigation database.
Table 5-8 Altitude Constraint Size and Color Coding
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
Light Blue Text
FLIGHT MANAGEMENT
Light Blue Subdued Text
The system cannot use this
altitude in determining vertical
speed and deviation guidance
because of an invalid constraint
condition
The system cannot use this
altitude in determining vertical
speed and deviation guidance
because of an invalid constraint
condition
5-93