Nav Receiver Manual Tuning - Garmin G1000:Beechcraft Baron 58/G58 User Manual

NAV radios are selected for listening by pressing the corresponding keys on the Audio Panel. Pressing the
NAV1, NAV2, ADF, or DME Key selects and deselects the navigation radio source. Selected audio can be heard over
the headset and the speakers (if selected). All radios can be selected individually or simultaneously.

NAV RECEIVER MANUAL TUNING

The NAV frequency controls and frequency boxes are on the left side of the PFDs.
Manually tuning a NAV frequency:
1) Turn the NAV Knob to tune the desired frequency in the NAV Tuning Box.
2) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.
3) Adjust the volume level with the NAV VOL/ID Knob.
4) Press the NAV VOL/ID Knob to turn the Morse code identifier audio on and off.
Press the Frequency Transfer Key to
Transfer NAV Frequencies Between
Active and Standby Frequency Fields
190-00663-00 Rev. A
Figure 4-18 Selecting a NAV Radio Receiver
Turn VOL/ID Knob to adjust
volume. Press Knob to Turn
Morse Code On or Off.
Turn the NAV Knob to
Tune the Frequency in
the Tuning Box
Garmin G1000 Pilot's Guide for the Beechcraft C90A/GT
Figure 4-19 NAV Frequency Tuning
AUDIO PANEL AND CNS
4-17