Garmin G1000:Beechcraft Baron 58/G58 User Manual page 215

DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints,
and a runway.
Selected
Departure
Preview of
Selected
Departure
Loading a departure procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Select the EDIT Softkey; or press the MENU Key, select 'EDIT FLIGHT PLAN', and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Select the LD DP Softkey; or press the MENU Key, select "Load Departure", and press the ENT Key. The
Departure Loading Page is displayed.
4) Select a departure. Press the ENT Key.
5) Select a transition for the selected departure. Press the ENT Key.
6) Select a runway served by the selected departure, if required. Press the ENT Key.
7) Press the ENT Key to load the selected departure procedure.
190-00663-00 Rev. A
Figure 5-63 Departure Loading Page - Selecting the Departure
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
FLIGHT MANAGEMENT
Departure Airport
Departures Available at
KMCI
Departure Waypoint
Sequence
5-69