Entering A Transponder Code - Garmin G1000:Beechcraft Baron 58/G58 User Manual

AUDIO PANEL AND CNS

ENTERING A TRANSPONDER CODE

Entering a transponder code with softkeys:
1) Select the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Select the CODE Softkey to display the Transponder Code Selection Softkeys, for digit entry.
3) Select the digit softkeys to enter the code in the code field. When entering the code, the next softkey in sequence
must be selected within 10 seconds, or the entry is cancelled and restored to the previous code. Selecting the
BKSP Softkey moves the code selection cursor to the previous digit. Five seconds after the fourth digit has been
entered, the transponder code becomes active.
Entering a transponder code with the PFD FMS Knob:
1) Select the XPDR and the CODE Softkeys as in the previous procedure to enable code entry.
2) Turn the small FMS Knob to enter the first two code digits.
3) Turn the large FMS Knob to move the cursor to the next code field.
4) Enter the last two code digits with the small FMS Knob.
5) Press the ENT Key to complete code digit entry.
Pressing the CLR Key or small FMS Knob before code entry is complete cancels code entry and restores the
previous code. Waiting for 10 seconds after code entry is finished activates the code automatically.
4-30
Figure 4-36 Entering a Code
Figure 4-37 Entering a Code with the FMS Knob
Garmin G1000 Pilot's Guide for the Beechcraft C90A/GT
Turn the Small
FMS Knob to
Enter Two Code
Digits at a Time
Entering
a Code
Press the
ENT Key to
Complete
Code Entry
Turn the Large
FMS Knob
to Move the
Cursor to the
Next Code Field
190-00663-00 Rev. A