HAZARD AVOIDANCE
System
Test Failed
The traffic mode is annunciated in the upper left corner of the Traffic Map Page. When the aircraft is on the
ground, TIS automatically enters Standby Mode. If traffic is selected for display on another map while Standby
Mode is selected, the traffic display enabled icon is crossed out (also the case when TIS has failed). Once the
aircraft is airborne, TIS switches to Operating Mode and traffic information is displayed. The mode can be
changed manually using softkeys or the page menu.
Mode
TIS Operating
TIS Standby
TIS Failed*
* See Table 6-14 for additional failure annunciations
6-78
Figure 6-84 TIS Power-up Test Failure
Traffic Mode Annunciation
(Traffic Map Page)
OPERATING
STANDBY
(Also shown in white in center of page)
FAIL
Table 6-13 TIS Modes
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
No Data
Received from
Transponder
Traffic Display Enabled Icon
(Other Maps)
190-00663-00 Rev. A