Garmin G1000:Beechcraft Baron 58/G58 User Manual page 343

6) Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page (Figure 6-58).
The following options are available (Figure 6-57):
• STRMSCP LTNG – Turns the display of Stormscope data on or off.
• STRMSCP MODE – Selects the CELL or STRIKE mode of lightning activity. Cell mode identifies clusters
or cells of electrical activity. Strike mode indicates the approximate location of lightning strikes.
• STRMSCP SMBL – Selects the range at which Stormscope data displays. Stormscope data is removed
when a map range greater than the STRMSCP SMBL value is selected (Figure 6-57).
190-00663-00 Rev. A
Figure 6-56 Page Menu
Figure 6-57 Map Setup Menu
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
HAZARD AVOIDANCE
6-51