Garmin G1000:Beechcraft Baron 58/G58 User Manual page 55

Setting the generic timer (PFD):
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to select the timer field (hh/mm/ss).
3) Use the FMS Knob to enter the desired time and press the ENT Key.
4) With the UP/DN field highlighted, turn the small FMS Knob to select the timer counting direction (UP/DN) and
press the ENT Key.
6) With 'START?' highlighted, press the ENT Key to start the timer. The field changes to 'STOP?'.
7) To stop the timer, press the ENT Key with 'STOP?' highlighted. The field changes to 'RESET?'.
8) To reset the timer, press the ENT Key with 'RESET?' highlighted. The field changes back to 'START?' and the
digits are reset.
9) To remove the window, press the CLR Key or the TMR/REF Softkey.
Setting the generic timer (MFD AUX - Utility Page)
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the small FMS Knob to select the timer counting direction (UP/DN) and press the ENT Key.
4) If a desired starting time is desired:
a) Use the large FMS Knob to highlight the HH:MM:SS field.
b) Use the FMS Knob to enter the desired time and press the ENT Key.
5) Turn the large FMS Knob to highlight 'START?' and press the ENT Key to start the timer. The field changes to
'STOP?'.
6) To stop the timer, press the ENT Key with 'STOP?' highlighted. The field changes to 'RESET?'.
7) To reset the timer, press the ENT Key with 'RESET?' highlighted. The field changes back to 'START?' and the
digits are reset.
190-00663-00 Rev. A
Figure 1-39 Generic Timer (PFD Timer/References Window)
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
SYSTEM OVERVIEW
1-43