Garmin G1000:Beechcraft Baron 58/G58 User Manual page 33

Garmin g1000: user guide
Hide thumbs Also See for G1000:Beechcraft Baron 58/G58:
Table of Contents

Advertisement

SENSOR
ADC1
ADC2
AHRS1
AHRS2
PFD
FD FRMT
DFLTS
WIND
BRG1
HSI FRMT
BRG2
ALT UNIT
STD BARO
OBS
CDI
DME
XPDR
XPDR1
XPDR2
STBY
ON
190-00663-00 Rev. A
Displays softkeys for selecting the #1 and #2 AHRS and Air Data Computers
Selects the #1 Air Data Computer
Selects the #2 Air Data Computer
Selects the #1 AHRS
Selects the #2 AHRS
Displays second-level softkeys for additional PFD configurations
Displays the softkeys for selecting the two flight director formats
Selects the single cue flight director format
SNGL CUE
Selects the cross pointer flight director format
X POINTR
Resets PFD to default settings, including changing units to standard
Displays softkeys to select wind data parameters
Longitudinal and lateral components
OPTN 1
Total direction and speed
OPTN 2
Total direction with head and crosswind speed components
OPTN 3
Information not displayed
OFF
Cycles the Bearing 1 Information Window through NAV1, GPS/ waypoint identifier
and GPS-derived distance information, and ADF/frequency.
Displays the softkeys for selecting the two HSI formats
Displays HSI as a 360° compass rose
360 HSI
Displays HSI as a 140° viewable arc
ARC HSI
Cycles the Bearing 2 Information Window through NAV2 or GPS waypoint identifier
and GPS-derived distance information, and ADF/frequency.
Displays softkeys for setting the altimeter and BARO settings to metric units
When enabled, displays altimeter in meters
METERS
Press to display the BARO setting as inches of mercury
IN
Press to display the BARO setting as hectopacals
HPA
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units are selected)
Selects OBS mode on the CDI when navigating by GPS (only available with active
leg)
Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI
Displays the DME Tuning Window, allowing tuning and selection of the DME
(optional)
Displays transponder mode selection softkeys
Selects the #1 transponder as active
Selects the #2 transponder as active
Selects standby mode (transponder does not reply to any interrogations)
Selects Mode A (transponder replies to interrogations)
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
SYSTEM OVERVIEW
1-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1000:beechcraft bonanzaG1000

Table of Contents