Interface Confirmation; Figure 3-11, Stormscope Configuration Page; Figure 3-12, Stormscope Configuration - Garmin G1000 NXi Supplemental Maintenance Manual

3.15 Interface Confirmation

Lightning Detection System Configuration Load Confirmation
Coordinate the StormScope configuration with Section 8.1 "Stormscope Functional Check".
1. With PFD in configuration mode, use the PFD large FMS knob to select OTHER and the
Stormscope configuration page.
2. Activate the cursor to highlight the DATA field. Use the small FMS knob to open the drop
down menu then select 'Config' and press ENT key on the PFD.
G1000 Supplemental Maintenance Manual
Textron Nav III Series
190-02128-04

Figure 3-11, Stormscope Configuration Page

Figure 3-12, Stormscope Configuration

Page 3-39
Revision 3