Track Vector - Garmin G1000:Beechcraft Baron 58/G58 User Manual

FLIGHT MANAGEMENT
The following range items are configurable on the airways menu:
Airway Type
Low Altitude Airway (LOW ALT AIRWAY)
High Altitude Airway (HI ALT AIRWAY)

TRACK VECTOR

The Navigation Map can display a track vector that is useful in minimizing track angle error. The track vector
is a dashed light blue line segment with an arrowhead attached to the end, extended to a predicted location
along the current aircraft track. The track vector look-ahead time is selectable (30 sec, 60 sec (default), 2 min,
5 min, 10 min, 20 min) and determines the length of the track vector. The arrowhead is continuously pointing
to the predicted aircraft location.
Displaying/removing the track vector:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Setup' option.
2) Press the ENT Key. The Map Setup Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'TRACK VECTOR' field.
6) Select 'On' or 'Off'. Press the ENT Key to accept the selected option. The flashing cursor highlights the look
ahead time field. Use the FMS Knob to select the desired time. Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page.
5-26
Table 5-4 Airway Range Information
Figure 5-24 Navigation Map -Track Vector
Garmin G1000 Pilot's Guide for the Hawker Beechcraft C90A/GT
Symbol Default
Range (nm)
200
300
Track Vector
Maximum
Range (nm)
500
500
190-00663-00 Rev. A