Garmin G1000:Beechcraft Baron 58/G58 User Manual page 484

ADDITIONAL FEATURES
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
selecting the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to
the channel list for the Presets category.
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, select the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Select the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Selecting the MORE Softkey repeatedly cycles through the preset channels.
3) Select any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
4) Select the SET Softkey on the desired channel number to save the channel as a preset.
Select SET
to Save Each
Preset Channel
Selecting the BACK Softkey, or waiting during 45 seconds of softkey inactivity, returns the system to the top
level softkeys.
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by selecting the VOL Softkey, which
brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, select the VOL Softkey.
2) Select the VOL – Softkey to reduce volume or select the VOL + Softkey to increase volume. (Once the VOL
Softkey is selected, the volume can also be adjusted using the small FMS Knob.)
3) Select the MUTE Softkey to mute the audio. Select the MUTE Softkey again to unmute the audio.
8-54
Figure 8-60 Accessing and Selecting XM Preset Channels
Figure 8-61 Volume Control
Garmin G1000 Pilot's Guide for the Beechcraft C90A/GT
Select PRESETS to
Access the Preset
Channels Softkeys
Select MORE to Cycle
Through the Preset
Channels
190-00663-00 Rev. A