Chapter 3 Installing A Cisco 12012 - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Installing a Cisco 12012
This chapter provides the procedures for installing the Cisco 12012 and contains the
following sections:
•
Installing the Brace Bar
•
Removing the Cisco 12012 Components before Installing the Frame
•
Rack-Mounting the Frame
•
Reinstalling the Cisco 12012 Components after Installing the Frame
•
Connecting Line Card Cables
•
Connecting Route Processor Cables
•
Connecting Alarm Card Cables
•
Connecting Power
You must install the Cisco 12012 in a rack; either a telco-style or a four-post unit.
Note
The Cisco 12012 is not designed to be installed as a shelf-mounted or a free-standing
system.
C H A P T E R
Installing a Cisco 12012 3-1
3