Rack-Mounting The Frame; Figure 3-11 Frame Mounting Hole Groups - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Rack-Mounting the Frame

Rack-Mounting the Frame
This section provides the procedure for installing the Cisco 12012 frame in a rack. Each
side of the frame has mounting holes to secure the frame to the rack. For ease of installation,
the holes on each side of the frame are divided into four groups: group A, B, C, and D. (See
Figure 3-11.)
Figure 3-11
Frame
Top blower
module rails
Card cage
assembly rails
Bottom blower
module rails
3-20 Cisco 12012 Gigabit Switch Router Installation and Configuration Guide
Frame Mounting Hole Groups
Frame
mounting
holes
group D
Frame
mounting
holes
group C
Frame
mounting
holes
group B
Frame
mounting
holes
group A