Unpacking The Cisco 12012; Checking The Shipping Packaging Contents - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Unpacking the Cisco 12012

To unpack your Cisco 12012, use the unpacking instructions in the document Cisco 12012
Unpacking Instructions posted on the outside of the shipping container.
Note
ship the router in the future.
If packing material is lost or damaged, the Cisco 12012 packing materials are available as
an orderable item; use Product Number PKG-GSR12=.

Checking the Shipping Packaging Contents

Check the contents of the shipping packaging and verify that the following are included
with your shipment:
•
One Cisco 12012, fully assembled (except for redundant AC-input power supplies)
•
One to four power supplies. Systems configured for source DC operation are shipped
with one or two DC-input power supplies installed in the power supply bay. Systems
configured for source AC operation are shipped with two AC-input power supplies
installed in the power supply bay. If your system is configured with redundant AC-input
power supplies (one or two additional AC-input power supplies), the additional power
supplies are shipped packaged in a large cardboard box on the front of the pallet.
•
One or more accessories boxes (one accessories box is shipped in the large cardboard
box on the front of the pallet. Additional accessories boxes are shipped separately.)
If you do not receive everything you ordered, contact a customer service representative for
assistance.
Do not discard the shipping packaging. You will need this packaging if you move or
Unpacking the Cisco 12012
Preparing for Installation 2-23