Figure 3-8 Removing Cards From The Lower Card Cage - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Removing the Cisco 12012 Components before Installing the Frame
Step 4 Select one of the cards in the lower card cage. Grasp the two card ejector levers
and simultaneously pivot both ejector levers 90 degrees away from the sides of
the card cage to unseat the card from the backplane connector. (See Figure 3-8.)
Figure 3-8 Removing Cards from the Lower Card Cage
Lower card
cage
Switch fabric
card
Card ejector lever Card ejector lever
Installing a Cisco 12012 3-13