Table of Contents
Advertisement
Preparing for Installation
This chapter provides specific information about preparing your site for the Cisco 12012.
Included are safety guidelines, specific preparatory information, and tools and parts
required to assure a successful installation of your Cisco 12012.
The shipping package for Cisco 12000 series routers is engineered to reduce the potential
of product damage associated with routine material handling experienced during shipment.
To minimize potential damage to the product, transport these products in their
Cisco-specified packagings. Failure to do so may result in damage to the router or
degradation of its performance. Also, do not remove the GSR or Internet Router from its
shipping container until you are ready to install it. The router should always be transported
or stored in an upright position. Keep the router in the shipping container until you have
determined where you will install it.
Use the unpacking documentation included with the router when you unpack the
Cisco 12012. Inspect all items for shipping damage. If anything is damaged, immediately
contact a customer service representative.
Sections in this chapter include the following:
•
Safety Recommendations
•
Site Requirement Guidelines
•
Tools for Installation
•
Unpacking the Cisco 12012
•
Site Log
C H A P T E R
Preparing for Installation 2-1
2
Advertisement
Table of Contents
Troubleshooting
