Installing The Cisco Rv260W; Desktop Mounting; Wall Mounting - Cisco RV260W Quick Start Manual

Welcome
Thank you for choosing the Cisco RV260W router.
The RV260W router provides reliable Internet access connectivity and
includes the following features:
• Easy to use UI with multiple set-up wizards.
• Eight port wireless router.
• Supports IPv6 firewall.
• Business-grade small business network in a box
This guide describes how to install your Cisco RV260W and launch the
web-based Device Manager.

Installing the Cisco RV260W

1
To prevent the device from overheating or being damaged:
• Ambient Temperature — Do not operate the device in an area that
exceeds an ambient temperature of 104°F (40°C).
• Air Flow — Be sure that there is adequate airflow around the device. If
wall mounting the device, make sure that the heat dissipation holes are
to the side.
• Circuit Overloading — Adding the device to the power outlet must not
overload that circuit.
• Mechanical Loading — Be sure that the device is level and stable to
avoid any hazardous conditions and that it is secure to prevent it from
sliding or shifting out of position. Do not place anything on top of the
device, as excessive weight may damage it.

Desktop Mounting

For desktop mounting, place the device on a flat surface so that it sits on its
four rubber feet.

Wall Mounting

The RV260W router has two wall-mount slots on the bottom panel. To
mount the router on a wall, you will need to use the wall-mount kit screws
(included).
Guidelines for Mounting the Router on a Wall
When choosing a location for mounting the router on a wall, consider cable
limitations and wall structure.
2
.
Cisco RV260W Router Quick Start Guide