Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual page 238

Loading and Running Diagnostics
Note
this option displays the name of the test as testing progresses, and it displays "fatalError"
when a failure is detected.
Router# diag 2 verbose
Running DIAG config check
Running Diags will halt ALL activity on the requested slot.
[confirm]
Router# <Return>
Launching a Field Diagnostic for slot 2
Downloading diagnostic tests to slot 2 (timeout set to 400 sec.)
Field Diag download COMPLETE for slot 2
FD 2> ****************************************************
FD 2> GSR Field Diagnostics V3.0
FD 2> Compiled by award on Tue Aug 3 15:58:13 PDT 2000
FD 2> view: award-bfr_112.FieldDiagRelease
FD 2> ****************************************************
FD 2> BFR_CARD_TYPE_OC48_1P_POS_TTM testing...
FD 2> running in slot 2 (73 tests)
Executing all diagnostic tests in slot 2
(total/indiv. timeout set to 600/220 sec.)
FD 2> Verbosity now (0x00000001) TESTSDISP
Field diagnostics, verbose example (continued)
FDIAG_STAT_IN_PROGRESS: test #1 R5K Internal Cache
FDIAG_STAT_IN_PROGRESS: test #2 Burst Operations
FDIAG_STAT_IN_PROGRESS: test #3 Subblock Ordering
FDIAG_STAT_IN_PROGRESS: test #4 Dram Marching Pattern
FDIAG_STAT_IN_PROGRESS: test #5 Dram Datapins
FDIAG_STAT_IN_PROGRESS: test #6 Dram Busfloat
.
.
.
FDIAG_STAT_IN_PROGRESS: test #73 SDRAM Traffic
FDIAG_STAT_DONE
Field Diagnostic ****PASSED**** for slot 2
6-8 Cisco 12012 Gigabit Switch Router Installation and Configuration Guide
In Cisco IOS Release 12.0(21)S or 12.0(21)ST, or a later release of 12.0S or 12.0ST,