Tools for Installation
Using Statistics to Estimate the Power Budget
Statistical models more accurately determine the power budget than the worst-case method.
Determining the link loss with statistical methods requires accurate knowledge of
variations in the data link components. Statistical power budget analysis is beyond the
scope of this document. For further information, refer to UNI Forum specifications, ITU-T
standards, and your equipment specifications.
Tools for Installation
The Cisco 12012 is designed to be installed with a minimum number of tools. The
following are required tools:
•
1/4-inch flat-blade screwdriver
•
3/16-inch flat-blade screwdriver
•
ESD-preventive wrist strap
•
Antistatic mat
•
Tape measure
•
10-mm wrench (either open-end or socket) for DC-input power supplies
•
9/16-inch or 15-mm wrench (either open-end or socket) to remove lag bolts from pallet
•
Wire cutters
•
Pliers
2-22 Cisco 12012 Gigabit Switch Router Installation and Configuration Guide