Document Organization - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Document Organization

Document Organization
This installation and configuration guide is organized into the following chapters and
appendixes:
•
Chapter 1, "Product Overview," provides an introduction to the Cisco 12012 with a
description of the system's components.
•
Chapter 2, "Preparing for Installation," is a preparatory chapter that describes safety
considerations, tools required, an overview of the installation, and procedures you
should perform before the actual installation.
•
Chapter 3, "Installing a Cisco 12012," provides instructions for installing the hardware
and connecting the external network interface cables.
•
Chapter 4, "Observing System Startup and Performing a Basic Configuration,"
provides simple procedures for completing a basic system configuration and for
checking and saving this configuration to system memory.
•
Chapter 5, "Troubleshooting the Installation," provides guidelines for troubleshooting
the Cisco 12012 hardware installation.
•
Chapter 6, "Running Diagnostics on the Cisco 12012," describes how to load and run
the Cisco 12012 field diagnostics.
•
Chapter 7, "Maintaining the Cisco 12012," provides simple maintenance procedures
that you might need to perform after you have installed the Cisco 12012. Also included
are removal and replacement procedures for the field replaceable units.
•
Appendix A, "Repackaging the Cisco 12012," provides instructions on repacking the
Cisco 12012 if you need to transport it to another site.
xx Cisco 12012 Gigabit Switch Router Installation and Configuration Guide