Figure 7-2 Removing The Air Filter - Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual

Cleaning and Replacing the Air Filter Assembly
Figure 7-2
Step 5
7-6 Cisco 12012 Gigabit Switch Router Installation and Configuration Guide
Removing the Air Filter
Air filter
Air filter
INPUT:
~
200 -240V
10 A
50/60 HZ
2000 W
tray
AC
OK
Visually check the condition of the air filter.
•
If the air filter appears dirty, you can vacuum it. For instructions on cleaning
the air filter, see "Cleaning the Air Filter" on page 7.
•
If the filter appears worn or is torn, you must replace it. For instructions on
replacing the air filter assembly, see "Replacing the Air Filter Assembly" on
page 7.
INPUT:
~
200 -240V
INPUT: ~
10 A 200 -240V
50/60 HZ
10 A
2000 W 50/60 HZ
2000 W
AC
OK AC
OK
OUTPUT
FAIL
Captive screw
INPUT:
~
200 -240V
10 A
50/60 HZ
2000 W
AC
OK
OUTPUT
FAIL