Loading and Running Diagnostics
Diagnostic Examples
Several examples of diagnostic tests are given in the following sections:
•
Without verbose Option on page 6
•
With verbose Option on page 7
•
Failed Diagnostic on page 9
Without verbose Option
To see how the verbose option changes the messages from the diagnostics to the console,
refer to the following examples.
In the first example, diagnostics are run on a line card installed in slot 2 in the card cage.
The diagnostics are run without the verbose option set (minimum messaging).
The console displays a message sequence similar to the following, showing the progress of
the diagnostic testing. In the following example message sequence, inserted comments
describe the type of diagnostic activity by the messages.
Router# diag 2
Running DIAG config check
Running Diags will halt ALL activity on the requested slot.
[confirm]
Router# <Return>
Launching a Field Diagnostic for slot 2
Downloading diagnostic tests to slot 2 (timeout set to 400 sec.)
Field Diag download COMPLETE for slot 2
FD 2> ****************************************************
FD 2> GSR Field Diagnostics V3.0
FD 2> Compiled by award on Tue Aug 3 15:58:13 PDT 2000
FD 2> view: award-bfr_112.FieldDiagRelease
FD 2> ****************************************************
FD 2> BFR_CARD_TYPE_OC48_1P_POS_TTM testing...
FD 2> running in slot 2 (73 tests)
Executing all diagnostic tests in slot 2
6-6 Cisco 12012 Gigabit Switch Router Installation and Configuration Guide