Cisco GSR12/60 - 12012 Router -AnyLAN, SONET/SDH Installation And Configuration Manual page 14

Figure 3-8
Figure 3-9
Figure 3-10
Figure 3-11
Figure 3-12
Figure 3-13
Figure 3-14
Figure 3-15
Figure 3-16
Figure 3-17
Figure 3-18
Figure 3-19
Figure 3-20
Figure 3-21
Figure 3-22
Figure 3-23
Figure 3-24
Figure 3-25
Figure 3-26
Figure 3-27
Figure 3-28
Figure 3-29
Figure 3-30
Figure 4-1
xiv Cisco 12012 Gigabit Switch Router Installation and Configuration Guide
Removing Cards from the Lower Card Cage
Removing a DC-Input Power Supply
Removing the Card Cage Assembly from the Frame
Frame Mounting Hole Groups
Installing the Frame in the Rack
Attaching an Interface Cable to a Line Card
Console and Auxiliary Port Connections
RJ-45 and MII Ethernet Connections
Ethernet MII Receptacle
Ethernet RJ-45 Receptacle
PRP Console and Auxiliary Port Connections
Using the Ethernet Port on the PRP
RJ-45 Receptacle and Plug (Horizontal Orientation)
Straight-Through Cable Pinout (Connecting MDI Ethernet Port to MDI-X
Wiring) 3-46
Crossover Cable Pinout (for Connecting Two PRPs)
Alarm Card Connectors
System Grounding Receptacles
Attaching a Grounding Lug to the Grounding Receptacles
Connecting Source AC to the AC-Input Power Supply
DC Power Cable Lug
Removing the DC-Input Power Supply Front Cover and Cable Bracket
Connecting the Source DC Power Cable Leads to the DC-Input Power Supply
Reinstalling the DC-Input Power Supply
RP Alphanumeric LED Displays (Partial Front Panel View)
3-15
3-20
3-22
3-32
3-33
3-37
3-38
3-39
3-44
3-48
3-51
3-57
3-63
3-13
3-19
3-41
3-45
3-46
3-52
3-55
4-3
3-59
3-61