Removing The Air Filter - Cisco ASR 5000 Series Installation Manual

Replacing the Chassis Air Filter

Removing the Air Filter

Follow the instructions below to remove the air filter.
Step 1
Access the chassis' lower fan tray assembly.
Step a
on its sides and pulling it toward you.
Step b
place and pull it away from the chassis.
Remove the plastic bezel from the lower-front of the chassis by placing your fingers in the notches
Use a Phillips #1 screwdriver to remove the fan tray cover. Loosen the four screws that secure it in
Removing the Air Filter ▀
ASR 5000 Installation Guide ▄
215