Setting Up The Authenticator; Figure 175: Windows Vista Local Area Connection Properties, Authentication Tab - Extreme Networks Sentriant AG Software User's Manual

802.1X Quarantine Method
5 Select the Authentication tab.

Figure 175: Windows Vista Local Area Connection Properties, Authentication Tab

6 Select the Enable IEE 802.1X authentication check box.
7 Select an EAP type from the Choose a network authentication method drop-down list. For this
example, select
Protected EAP (PEAP).
Important: This EAP type must match the EAP type selected in
8 Clear or select the Cache user information for subsequent connections to this network check box.
The choice is yours.
9 Click OK.
10 Select to reboot if prompted.

Setting up the Authenticator

This section provides sample configurations for the following switches:
"Cisco® 2950 IOS" on page 293
●
"Cisco® 4006 CatOS" on page 293
●
"Enterasys® Matrix 1H582-25" on page 294
●
"Extreme® Summit 48si" on page 294
●
"ExtremeWare" on page 295
●
"ExtremeXOS" on page 296
●
"Foundry® FastIron® Edge 2402" on page 296
●
"HP ProCurve 420AP" on page 297
●
292
step 7, step q on page 267.
Sentriant AG Software Users Guide, Version 5.2