Add A Policy Based Service - Extreme Networks IP Service Manager User Manual

Add a Policy Based Service

When you create a policy based service, you will specify whether traffic is blocked, will
use no rate limiting, or will use rate limiting, and you will apply one or more traffic
policies to the policy based service.
Summary Steps. To add a policy based service:
1 Launch the Create Policy Based Service wizard
2 Enter the service name
3 Select the service category
4 Select the default ingress behavior
5 Add at least one traffic policy
6 Select Finish
Detailed Steps. The following steps are a more detailed explanation of the previous
section.
To add a policy based service:
1 Launch the Create Policy Based Service wizard
To launch the Create Policy Based Service wizard, select Edit>Add>Policy Based
Service from the menu, or right-click in the Policy Based Service Bundles panel and
select Add>Policy Based Service from the pop-up menu. The Create Policy Based
Service wizard will appear (see Figure 4-3).
IP Service Manager User Guide
Service Library Tasks
4-7