Aving A Voice Memory Onto An Sd Card Or Usb Flash Drive - Icom IC-7850 Instruction Manual

9
VOICE RECORDER FUNCTIONS
Voice Set mode (Continued)
■
PTT Auto REC
Turn the PTT Automatic Recording function ON or
OFF.
• OFF: The recording does not start even if a signal is
transmitted.
• ON: The recording automatically starts when a sig-
nal is transmitted.
The recording will stop when:
• 10 seconds has passed without transmission
after the last transmission.
• 10 minutes has passed with no signal after the
last transmission.
- If you receive a signal within 10 seconds after
the last transmission, the received audio is
also recorded.
- If you receive another signal within 10 sec-
onds after the last reception, the received
audio is also recorded.
• 10 minutes has past while operating with the
squelch is open in the SSB, CW, RTTY, PSK,
or AM mode.
• The frequency or operating mode is changed.
• The operating method (V/M, M-CH, Band
Stacking Register, and so on) is changed.
■ Saving a voice memory onto an SD card or USB flash drive
The TX voice memory and the RX voice memory are
saved onto an SD card or USB flash drive along with
the memory channel contents and set mode settings.
See "Saving the setting data onto an SD card or USB
flash drive" on page 10-5
To save the RX voice memory, set the "Voice RX Mem-
ory" item to ON, on the
SET [F-7]  SD/USB [F-7]  SAVE [F-2] 
Voice RX Memory)
(Default: OFF)
for more details.
Save set screen. (p. 10-4)
PRE-REC for PTT Auto REC
Select whether or not record the audio that is received
before the PTT Automatic Recording function is acti-
vated.
• OFF: Does not record the audio that is received be-
fore the PTT Automatic Recording function is
activated.
• 5s/10s/15s:
Records the audio that is previously received
this set period before the PTT Automatic Re-
cording function is activated.
QSO PLAY Skip Time
Set the Skip time to forward or rewind while playing
back the QSO audio.
Options: 3s, 5s, 10s, or 30s.
INSTANT REPLAY REC Time
Set the record time for
[REC] is pushed.
Options: 5s to 30s (1 second steps)
Play Time
Set the playback time for
when [PLAY] is pushed.
Options: 3s to 10s (1 second steps)
9-14
(Default: 10s)
(Default: 10s)
(Default: 15s)
the Instant replay function
(Default: 5s)
the Instant replay function
when