Configuring Mib Data Collection And Transfer - Cisco ME 3400 Software Configuration Manual

Configuring SNMP
Command
Step 4
end
Step 5
show running-config
Step 6 copy running-config startup-config

Configuring MIB Data Collection and Transfer

This section includes basic configuration for MIB data collection. For more information, see the Periodic
MIB Data Collection and Transfer Mechanism feature module at this URL:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a008014c77d.
html
Beginning in privileged EXEC mode, follow these steps to configure a bulk-statistics object list and
schema options:
Command
Step 1 configure terminal
Step 2
snmp mib bulkstat object-list list-name
Step 3
add {object-name | oid}
Step 4 exit
Step 5
snmp mib bulkstat schema schema-name
Step 6
object-list list-name
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
29-18
Purpose
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Define an SNMP bulk-statistics object list, and enter bulk-statistics
object-list configuration mode.
Add a MIB object to the bulk-statistics object list.
• For object-name, enter the name of the MIB object to add to the
list. You can enter only object names from the Interfaces MIB
or the Cisco Committed Access Rate MIB.
For oid, enter the Object ID of the MIB object to add to the list.
•
All the objects in an object-list must be in the same MIB index, but
the objects need not belong to the same MIB table. Repeat the
command until all objects to be monitored are added.
Return to global configuration mode.
Name the SNMP bulk statistics schema, and enter bulk-statistics
schema configuration mode.
Specify the bulk-statistics object list to be included in this schema.
Specify only one object list per schema. If multiple object-list
commands are entered, the most recent command overwrites the
previous command.
Chapter 29 Configuring SNMP
OL-9639-07