Monitoring And Maintaining Msdp - Cisco ME 3400 Software Configuration Manual

Chapter 43 Configuring MSDP

Monitoring and Maintaining MSDP

To monitor MSDP SA messages, peers, state, or peer status, use one or more of the privileged EXEC
commands in
Table 43-1 Commands for Monitoring and Maintaining MSDP
Command
debug ip msdp [peer-address | name] [detail] [routes]
debug ip msdp resets
show ip msdp count [autonomous-system-number]
show ip msdp peer [peer-address | name]
show ip msdp sa-cache [group-address | source-address |
group-name | source-name] [autonomous-system-number]
show ip msdp summary
To clear MSDP connections, statistics, or SA cache entries, use the privileged EXEC commands in
Table
Table 43-2 Commands for Clearing MSDP Connections, Statistics, or SA Cache Entries
Command
clear ip msdp peer peer-address | name
clear ip msdp statistics [peer-address | name]
clear ip msdp sa-cache [group-address | name]
OL-9639-07
Table 43-1:
43-2:
Purpose
Clears the TCP connection to the specified MSDP peer, resetting all
MSDP message counters.
Clears statistics counters for one or all the MSDP peers without resetting
the sessions.
Clears the SA cache entries for all entries, all sources for a specific group,
or all entries for a specific source/group pair.
Purpose
Debugs an MSDP activity.
Debugs MSDP peer reset reasons.
Displays the number of sources and groups originated in SA
messages from each autonomous system. The ip msdp
cache-sa-state command must be configured for this command to
produce any output.
Displays detailed information about an MSDP peer.
Displays (S,G) state learned from MSDP peers.
Displays MSDP peer status and SA message counts.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Monitoring and Maintaining MSDP
43-17