Administering The Switch; Managing The System Time And Date - Cisco ME 3400 Software Configuration Manual

Administering the Switch

This chapter describes how to perform one-time operations to administer the Cisco ME 3400Ethernet
Access switch.
This chapter consists of these sections:
•
•
•
•
•
•

Managing the System Time and Date

You can manage the system time and date on your switch using automatic configuration, such as the
Network Time Protocol (NTP), or manual configuration methods.
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Note
Configuration Fundamentals Command Reference, Release 12.2.
These sections contain this configuration information:
•
•
•
•
OL-9639-07
Managing the System Time and Date, page 5-1
Configuring a System Name and Prompt, page 5-14
Creating a Banner, page 5-17
Suppressing the Power-Supply Alarm on an ME 3400G-12CS Switch, page 5-19
Managing the MAC Address Table, page 5-20
Managing the ARP Table, page 5-29
Understanding the System Clock, page 5-2
Understanding Network Time Protocol, page 5-2
Configuring NTP, page 5-4
Configuring Time and Date Manually, page 5-11
C H A P T E R
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
5
5-1