Downloading An Image File By Using Tftp - Cisco ME 3400 Software Configuration Manual

Working with Software Images

Downloading an Image File By Using TFTP

You can download a new image file and replace the current image or keep the current image.
Beginning in privileged EXEC mode, follow Steps 1 through 3 to download a new image from a TFTP
server and overwrite the existing image. To keep the current image, go to Step 3.
Command
Step 1
Step 2
Step 3 archive download-sw /overwrite /reload
tftp:[[//location]/directory]/image-name.tar
Step 4 archive download-sw /leave-old-sw /reload
tftp:[[//location]/directory]/image-name.tar
The download algorithm verifies that the image is appropriate for the switch model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the flash device whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
If the flash device has sufficient space to hold two images and you want to overwrite one of these images
Note
with the same version, you must specify the /overwrite option.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
B-26
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Purpose
Copy the image to the appropriate TFTP directory on the
workstation. Make sure the TFTP server is properly configured; see
the "Preparing to Download or Upload an Image File By Using
TFTP" section on page
Log into the switch through the console port or a Telnet session.
Download the image file from the TFTP server to the switch, and
overwrite the current image.
• The /overwrite option overwrites the software image in flash
memory with the downloaded image.
• The /reload option reloads the system after downloading the
image unless the configuration has been changed and not been
saved.
For //location, specify the IP address of the TFTP server.
•
For /directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and image
names are case sensitive.
Download the image file from the TFTP server to the switch, and
keep the current image.
The /leave-old-sw option keeps the old software version after
•
a download.
The /reload option reloads the system after downloading the
•
image unless the configuration has been changed and not been
saved.
• For //location, specify the IP address of the TFTP server.
For /directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and image
names are case sensitive.
B-25.
OL-9639-07