Cisco ME 3400 Software Configuration Manual page 146

Displaying the SDM Templates
This is an example of output from the show sdm prefer layer-2 command:
Switch# show sdm prefer layer-2
"layer-2" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups:
number of IPv4 multicast routes:
number of IPv4 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
This is an example of output from the show sdm prefer dual-ipv4-and-ipv6 routing command:
Switch# show sdm prefer dual-ipv4-and-ipv6 routing
"desktop IPv4 and IPv6 routing" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of IPv6 multicast groups:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
6-6
Chapter 6 Configuring SDM Templates
8K
1K
0
0
0
0.5K
1K
1.5K
1K
2.75K
1.5K
1.25K
1.125k
1.5K
1.25K
0.25K
0.75K
0.5K
0.25K
0.5K
0.5K
OL-9639-07