Configuring Ethernet Cfm Service - Cisco ME 3400 Software Configuration Manual

Chapter 41 Configuring Ethernet OAM, CFM, and E-LMI
Command
Step 9
ethernet cfm cc {[enable] level {level-id | any} vlan
{vlan-id | any}}
Step 10 end
Step 11 show ethernet cfm domain brief
show ethernet cfm maintenance-points local
show ethernet cfm traceroute-cache
Step 12
show running-config
Step 13 copy running-config startup-config
Use the no versions of the commands to remove the configuration or return to the default configurations.

Configuring Ethernet CFM Service

Beginning in privileged EXEC mode, follow these steps to set up service for Ethernet CFM:
Command
Step 1
configure terminal
Step 2 ethernet cfm domain domain-name level level-id
Step 3
service csi-id vlan vlan-id
Step 4
exit
Step 5
ethernet cfm enable
Step 6 interface interface-id
OL-9639-07
Purpose
Configure per domain continuity check (cc) parameters.
The level ID identifies the domain to which configuration
applies.
Enter enable to enable CFM cc for the domain level.
•
Enter a maintenance level as a level number (0 to 7) or
•
as any for all maintenance levels.
Enter the VLANs to apply the check to, as a VLAN-ID
•
(1 to 4095), a range of VLAN-IDs separated by a
hyphen, a series of VLAN IDs separated by commas,
or any for any VLANs.
Return to privileged EXEC mode.
Verify the configuration.
Verify your entries.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Define a CFM domain, set the domain level, and enter
ethernet-cfm configuration mode for the domain. The
maintenance level number range is 0 to 7.
Define a universally unique customer service instance
(CSI) and VLAN ID within the maintenance domain.
csi-id—a string of no more than 100 characters that
•
identifies the CSI.
• vlan-id—VLAN range is from 1 to 4095. You cannot
use the same VLAN ID for more than one domain at
the same level.
Return to global configuration mode.
Globally enable CFM.
Specify a physical interface or a port channel to configure,
and enter interface configuration mode.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Configuring Ethernet CFM
41-7