Displaying The Logging Configuration - Cisco ME 3400 Software Configuration Manual

Chapter 28 Configuring System Message Logging
Command
Step 3
logging trap level
Step 4
logging facility facility-type
Step 5 end
Step 6 show running-config
Step 7 copy running-config startup-config
To remove a syslog server, use the no logging host global configuration command, and specify the syslog
server IP address. To disable logging to syslog servers, enter the no logging trap global configuration
command.
Table 28-4
facilities, consult the operator's manual for your UNIX operating system.
Table 28-4
Facility Type Keyword
auth
cron
daemon
kern
local0-7
lpr
mail
news
sys9-14
syslog
user
uucp

Displaying the Logging Configuration

To display the logging configuration and the contents of the log buffer, use the show logging privileged
EXEC command. For information about the fields in this display, see the Cisco IOS Configuration
Fundamentals Command Reference, Release 12.2.
OL-9639-07
Purpose
Limit messages logged to the syslog servers.
Be default, syslog servers receive informational messages and lower. See
Table 28-3 on page 28-9
Configure the syslog facility. See
facility-type keywords.
The default is local7.
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
lists the UNIX system facilities supported by the software. For more information about these
Logging Facility-Type Keywords
Description
Authorization system
Cron facility
System daemon
Kernel
Locally defined messages
Line printer system
Mail system
USENET news
System use
System log
User process
UNIX-to-UNIX copy system
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Displaying the Logging Configuration
for level keywords.
Table 28-4 on page 28-13 for
28-13