Displaying Ip Source Guard Information - Cisco ME 3400 Software Configuration Manual

Displaying IP Source Guard Information

Displaying IP Source Guard Information
To display the IP source guard information, use one or more of the privileged EXEC commands in
Table
Table 19-4 Commands for Displaying IP Source Guard Information
Command
show ip source binding
show ip verify source
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
19-22
19-4:
Purpose
Display the IP source bindings on a switch.
Display the IP source guard configuration on the switch.
Chapter 19 Configuring DHCP Features and IP Source Guard
OL-9639-07