User Interface For Urpf; User Interface For Syslog - Cisco ME 3400 Software Configuration Manual

Configuring Multi-VRF CE

User Interface for uRPF

uRPF can be configured on an interface assigned to a VRF, and source lookup is done in the VRF table.
Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for uRPF. For
complete syntax and usage information for the commands, refer to the switch command reference for
this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
Step 1
configure terminal
Step 2 interface interface-id
Step 3 no switchport
Step 4 ip vrf forwarding <vrf-name>
Step 5 ip address ip address
Step 6
ip verify unicast reverse-path
Step 7
end

User Interface for Syslog

Beginning in privileged EXEC mode, follow these steps to configure VRF-aware services for Syslog.
For complete syntax and usage information for the commands, refer to the switch command reference
for this release and the Cisco IOS Switching Services Command Reference, Release 12.2.
Command
Step 1 configure terminal
Step 2 logging on
Step 3 logging host ip address vrf vrf name
Step 4
logging buffered logging buffered size
debugging
Step 5
logging trap debugging
Step 6 logging facility facility
Step 7 end
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
35-88
Purpose
Enter global configuration mode.
Enter interface configuration mode, and specify the Layer 3 interface to
configure.
Remove the interface from Layer 2 configuration mode if it is a physical
interface.
Configure VRF on the interface.
Enter the IP address for the interface.
Enable uRPF on the interface.
Return to privileged EXEC mode.
Purpose
Enter global configuration mode.
Enable or temporarily disable logging of storage router event message.
Specify the host address of the syslog server where logging messages
are to be sent.
Log messages to an internal buffer.
Limit the logging messages sent to the syslog server.
Send system logging messages to a logging facility.
Return to privileged EXEC mode.
Chapter 35 Configuring IP Unicast Routing
OL-9639-07