Show Platform Pm - Cisco Catalyst 2960 Command Reference Manual

show platform pm

show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
Syntax Description counters
group-masks
idbs {active-idbs |
deleted-idbs}
if-numbers
link-status
platform-block
port-info interface-id
vlan {info | line-state}
| begin
| exclude
| include
expression
Though visible in the command-line help strings, the stack-view keyword is not supported.
Note
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Catalyst 2960 Switch Command Reference
C-14
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | vlan {info | line-state}
[ | {begin | exclude | include} expression]
Display module counters information.
Display EtherChannel group masks information.
Display interface data block (IDB) information. The keywords have these
meanings:
•
•
Display interface numbers information.
Display local port link status information.
Display platform port block information.
Display port administrative and operation fields for the specified interface.
Display platform VLAN information. The keywords have these meanings:
•
•
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Appendix C
active-idbs—Display active IDB information.
deleted-idbs—Display deleted and leaked IDB information.
info—Display information for active VLANs.
line-state—Display line-state information.
Catalyst 2960 Switch Show Platform Commands
78-16882-01