Show Platform Pm - Cisco Catalyst 2960-X Command Reference Manual

show platform pm

show platform pm
To display platform-dependent port manager information, use the show platform pm command in privileged
EXEC mode.
show platform pm {counters| group-masks| idbs {active-idbs| deleted-idbs}| if-numbers| link-status|
module-info| platform-block| port-info interface-id| stack-view| vlan {info| line-state}}
Syntax Description
counters
group-masks
idbs {active-idbs | deleted-idbs}
if-numbers
link-status
module-info
platform-block
port-info interface-id
stack-view
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
68
Layer 2 Commands
Displays module counters
information.
Displays EtherChannel group
masks information.
Displays interface data block (IDB)
information. The keywords have
these meanings:
• active-idbs—Displays active
IDB information.
• deleted-idbs—Displays
deleted and leaked IDB
information.
Displays interface numbers
information.
Displays local port link status
information.
Displays module status
information.
Displays platform port block
information.
Displays port administrative and
operation fields for the specified
interface.
Displays status information for the
stack.
This keyword is not supported in
the LAN Lite image.
OL-29043 -01