Setting the IP Address Using NetSpot Device Installer
This section describes the procedure for using NetSpot Device Installer without installing it.
For details on the procedure for installing NetSpot Device Installer, see
Make sure that the LAN cable is connected properly, and the printer is turned ON.
"Connecting the Printer and Computer"
Turn the computer on, and then log on to Windows as a user with administrative rights.
Insert the supplied CD-ROM "User Software" into the CD-ROM drive of your computer.
Click [Additional Software Programs].
If the above screen does not appear
"Basic Operations/Various Information for
If the [AutoPlay] dialog box appears
Click [Run AUTORUN.EXE].
"Installing NetSpot Device