Jasic EVOLVE 200 Operator's Manual page 21

DESCRIPTION OF 'LCD' CONTROL PANEL
Memory function: (continued)
Load Job
Select Load Job to open up the list of saved jobs. These jobs can be filtered by material, wire diameter,
gas type or your inputted description. Simply select and confirm the desired job to load the settings.
Reset Job to Original Values
If you have changed settings of a job and wish to reset the settings back to the original saved values,
simply select the Reset Job to original values option.
Return to Free Job
If you wish to exit the saved jobs and return to free settings, simply hit the Return to Free Job option.
You will get the choice to carry over your saved settings into Free Job mode, or set the machine settings
back to default.
Job Maker
Saved welding job can also be defined within JTE APP and the JTE Cloud system.
•
Job Maker
It is possible to define a free Job description and define the job protection level.
•
Job Description
It is possible add a short description of the Job, the Job description will be shown in the Job data.
21