Jasic EVOLVE 200 Operator's Manual page 105

APP REMOTE CONTROL
Before starting any welding activity please ensure that you have suitable eye protection and
protective clothing. Always take the necessary steps to protect any persons within the welding
area.
App remote control (continued)
Once the JTE App finished and following pressing the bottom function 'Search for Available Machine' as
shown on the previous page, the app will search for the machine as image 'D' shows below.
Once the app has discovered your machine as shown in image 'E' below the details of that machine,
including the model number and it's serial number will be shown as confirmation.
Pressing the 'Remote' tab will then start the process of connecting the app to the chosen machine as
shown in image F below.
Please Note, If you have more than 1 Evolve product and you wish to add a second Evolve machine to
the app, you will note that at the bottom of the screen (as seen in image E) the plus
allows you to add further Jasic Evolve products going forward to the app.
D
Once the JTE cloud app is fully connected to your Evolve 200 machine, your
mobile phone screen will show the current welding mode that the Evolve
machine is presently in.
The image left is the JTE
app now connected to
the machine and you
will note that the details
on the app match the
Evolve machine screen
image as in the image
shown right.
If, for example you
change the welding
current via the JTE app or via the Evolve user screen, the app and machine will
sync and update almost immediately and display the updated welding data.
E
105
icon, which
F