Hard Shutdown - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

September 2000

Hard Shutdown

Use this method for shutting down the printer for an extended period of time
(several days or longer).
1. Do a soft shutdown. See "Soft Shutdown" on page 2-8.
CAUTION: Turn off the circuit breaker only after doing the soft shutdown.
Otherwise, you could lose printer status information and will
cause dark lines to appear in the middle of the prints if paper
is loaded.
2. Turn off the circuit breaker on the back of the printer.
circuit breaker
Using the System
2-9