Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual page 90

Diagnostics and Troubleshooting
Error Error Code /Status
Code Message
1202 Error:_error_from
densitometer.
1203 Error: Number of patches
seen by densitometer is
incorrect.
1300 Values have not been loaded
1301 Data or Matrix files have not
yet been loaded
1302 Data cannot be saved, must
first apply the matrix
5-20
Possible Cause/Subsystem
Unexpected error was returned
from the densitometer.
Unable densities on densitometer.
Matrix file missing.
Matrix file missing.
Matrix file missing.
Possible Solution
Calibrate the densitometer. If the
problem continues, check the
manual for the densitometer.
Try adjusting frame counts or
reread the density patches on the
densitometer.
Create a new device.
Create a new device.
Create a new device.
September 2000