Updating A Device - Kodak LED II PRINTER 20R - OPERATOR'S GUIDE Operator's Manual

Edit
icon
Device
icon
September 2000

Updating a Device

To update or change the device name or the SCSI ID for any device:
1. Select the device by clicking once on the device icon on the KODAK Device
Calibration screen.
2. Click the Edit icon.
The Update a Device dialog box appears.
3. Enter the correct device settings.
The options for the device settings include:
Device Setting
Device name
SCSI Host Adapter
SCSI ID
4. Click OK to save (or Cancel to cancel) the changes.
Additional Calibration Information
Options
Enter the name that you want to give to the device.
NOTE: The MACINTOSH platform limits the device
name to 10 characters.
Adapter ID on host computer
The SCSI ID for the device
C-9